IBM Books

MAS V3.4 Protocol Reference V2


Index

A B C D E F G H I J L M N O P R S T U V W
A
  • access-control
  • IPv6 monitoring command (2004)
  • accounting and node statistics (1502)
  • activate
  • APPN monitoring command (1583)
  • activate_new_config
  • APPN configuration command (1574)
  • add
  • AppleTalk Phase 2 configuration command (1636)
  • APPN configuration command (1554)
  • IPv6 configuration command (1972)
  • IPv6 update packet filter configuration command (1990)
  • NDP configuration command (2046)
  • OSI configuration command (1859)
  • RIP6 configuration command (2137)
  • VINES configuration command (1675)
  • Address Resolution Protocol (ARP)
  • VINES (1670)
  • addresses
  • OSI/DECnet V monitoring command (1877)
  • aping
  • APPN monitoring command (1585)
  • AppleTalk Control Protocol
  • for PPP (1624)
  • AppleTalk Phase 2
  • basic configuration procedures (1620), (1627)
  • configuring (1619)
  • monitoring (1630)
  • network parameters (1622), (1628)
  • router parameters (1621)
  • AppleTalk Phase 2 configuration commands
  • add (1635)
  • delete (1637)
  • disable (1639)
  • enable (1641)
  • list (1643)
  • set (1645)
  • AppleTalk Phase 2 monitoring commands
  • atecho (1647)
  • cache (1649)
  • clear counters (1651)
  • counters (1652)
  • dump (1654)
  • interface (1656)
  • APPN (1529)
  • monitoring (1577)
  • APPN (DLSw) (1482)
  • APPN configuration commands
  • activate_new_config (1573)
  • add (1553)
  • delete (1569)
  • enable/disable (1546)
  • list (1571)
  • set (1549)
  • TN3270 (1545)
  • APPN dynamic reconfiguration (1618)
  • APPN Frame Relay BAN Connection Network (1508), (1562), (1563)
  • APPN monitoring commands
  • accessing (1579)
  • activate (1582)
  • aping (1584)
  • deactivate link (1586)
  • dump (1588)
  • list (1590)
  • log (1592)
  • memory (1594)
  • restart (1602)
  • rtp status (1596)
  • rtp switchpath (1598)
  • rtp test (1600)
  • stop (1604)
  • summary (1581)
  • tn3270e (1606), (1610)
  • transmit (1608)
  • atecho
  • AppleTalk Phase 2 monitoring command (1648)
  • ATM
  • APPN using (1521)
  • ATM LAN Emulation
  • configuring DNA IV (1711)
  • B
  • before you configure (1494)
  • BGP monitoring commands
  • destinations
  • received (2215)
  • BGP6 configuration commands (2168), (2174), (2179), (2187), (2195)
  • add
  • aggregate (2169)
  • neighbor (2170)
  • no-receive (2171)
  • receive (2172)
  • send (2173)
  • change
  • change originate (2175)
  • change receive (2177)
  • change send (2178)
  • delete
  • aggregate (2180)
  • neighbor (2181)
  • no (2182)
  • originate (2183)
  • receive (2185)
  • send (2186)
  • disable
  • BGP6 speaker (2188)
  • classless-bgp (2189)
  • neighbor (2190)
  • enable (2191)
  • BGP6 speaker (2192)
  • compare-med-from-diff-AS (2193)
  • neighbor (2194)
  • list
  • aggregate (2196)
  • all (2197)
  • BGP6 speaker (2198)
  • neighbor (2199)
  • no (2200)
  • originate (2201)
  • receive (2203)
  • send (2204)
  • move (2205)
  • policy-to-neighbor (2176), (2184), (2202)
  • set (2206)
  • update (2207)
  • BGP6 dynamic reconfiguration (2228)
  • BGP6 monitoring commands
  • disable neighbor (2209)
  • dump routing tables (2210)
  • enable neighbor (2213)
  • list (2214)
  • neighbors (2216)
  • parameter (2217)
  • paths (2218)
  • ping6 (2219)
  • policy-list (2221)
  • reset neighbor (2223)
  • sizes (2224)
  • traceroute6 (2225)
  • Border Gateway Protocol for IPv6--see BGP6 (2229)
  • Border Node
  • COS mapping table (1568)
  • routing list (1567)
  • Branch Extender (1460), (1463), (1483), (1555), (1556) , (1557), (1558), (1559), (1560), (1561) , (1565), (1566)
  • C
  • cache
  • AppleTalk Phase 2 monitoring command (1650)
  • IPv6 monitoring command (2006)
  • change
  • IPv6 configuration command (1974)
  • IPv6 update packet filter configuration command (1992)
  • NDP configuration command (2048)
  • RIP6 configuration command (2139)
  • change metric
  • OSI/DECnet V monitoring command (1879)
  • change prefix-address (1862)
  • clear (1864)
  • PIM monitoring command (2095)
  • CLNP protocol (1790)
  • clnp-Stats
  • OSI/DECnet V monitoring command (1881)
  • command summary
  • BGP (2167), (2208)
  • DNA IV (1737)
  • configurable Held Alert Queue (1474), (1493), (1552)
  • configuration changes, affect on the router (1478)
  • configuration options (1479)
  • configuration requirements (1480)
  • configuring TN3270 under APPN (1530)
  • connection networks (1459)
  • COS (1497)
  • CoS mapping table (1487)
  • counters
  • AppleTalk Phase 2 monitoring command (1653)
  • IPv6 monitoring command (2008)
  • VINES monitoring command (1691)
  • D
  • DDDLU (1531)
  • Creating LUs at VTAM (1532)
  • Deleting LUs from VTAM (1533)
  • example VTAM PU definition (1535)
  • using Network Dispatcher with (1534)
  • deactivate link
  • APPN monitoring command (1587)
  • deactivate LU
  • TN3270E monitoring command (1614)
  • DECnet NCP
  • See NCP (1700)
  • delete
  • AppleTalk Phase 2 configuration command (1638)
  • APPN configuration command (1570)
  • IPv6 configuration command (1976)
  • IPv6 update packet filter configuration command (1994)
  • NDP configuration command (2050)
  • OSI configuration command (1866)
  • PIM configuration command (2079)
  • RIP6 configuration command (2141)
  • VINES configuration command (1676)
  • destination devices (1942)
  • dhcpv6-relay
  • NDP monitoring command (2064)
  • Dial on Demand (1516)
  • APPN using (1515)
  • Digital Network Architecture (DNA) phase IV (1699)
  • disable
  • AppleTalk Phase 2 configuration command (1640)
  • APPN configuration command (1548)
  • IPv6 configuration command (1978)
  • NDP configuration command (2052)
  • OSI configuration command (1868)
  • PIM configuration command (2081)
  • RIP6 configuration command (2143)
  • VINES configuration command (1677)
  • DLUR (1456), (1457), (1490), (1491), (1504)
  • DLUR retry algorithm (1505)
  • DNA IV
  • access control
  • configuring (1725)
  • exclusive (1727)
  • inclusive (1726)
  • managing traffic (1724)
  • addressing
  • 802.5 Token (1710)
  • description (1708)
  • Ethernet data link (1709)
  • X.25 data link (1713)
  • area routers
  • description (1718)
  • level 1 (1719)
  • level 2 (1720)
  • area routing filters (1728)
  • area support of (1702)
  • blending domains (1729)
  • configuration
  • for X.25 (1732)
  • configuring over ATM LAN Emulation (1712)
  • designated router for (1716)
  • LAT protocol (1705)
  • MOP support of (1703)
  • Network Control Program (NCP) (1722)
  • See NCP (1701)
  • routing (1714), (1715)
  • routing parameters (1721)
  • routing tables (1717)
  • special considerations and limitations (1706)
  • terminology and concepts (1707)
  • DNA IV configuration commands
  • define
  • circuit (1740)
  • executor (1742)
  • module access (1744)
  • module routing (1746)
  • node (1748)
  • help (1738)
  • purge
  • module access (1752)
  • module routing (1754)
  • show
  • area (1760)
  • node (1762)
  • show/list
  • circuit (1766)
  • executor (1768)
  • module access (1770)
  • module routing (1772)
  • zero
  • circuit (1778)
  • executor (1780)
  • module access (1776), (1782)
  • DNA IV monitoring commands
  • define
  • circuit (1741)
  • executor (1743)
  • module access (1745)
  • module routing (1747)
  • node (1749)
  • help (1739)
  • purge
  • module access (1753)
  • module routing (1755)
  • show
  • area (1761)
  • node (1763)
  • show/list
  • circuit (1767)
  • executor (1769)
  • module access (1771)
  • routing (1773)
  • zero
  • circuit (1779)
  • executor (1781)
  • module access (1783)
  • module_access (1777)
  • DNA V
  • networks (1730)
  • X.25 configuration
  • Count 2 (1731)
  • DNAV-info
  • OSI/DECnet V monitoring command (1885)
  • dump
  • AppleTalk Phase 2 monitoring command (1655)
  • APPN monitoring command (1589)
  • IPv6 monitoring command (2010)
  • NDP monitoring command (2066)
  • PIM monitoring command (2093)
  • RIP6 monitoring command (2155)
  • VINES (1693)
  • dump routing tables
  • BGP6 monitoring command (2211)
  • dynamic reconfiguration
  • APPN (1617)
  • BGP6 (2227)
  • IPv6 (2039)
  • MFC (2127)
  • MFC for IPv6 (2130)
  • NDP6 (2071)
  • NHRP server (1962)
  • PIM (2122)
  • PIM for IPv6 (2125)
  • RIP6 (2164)
  • E
  • enable
  • AppleTalk Phase 2 configuration command (1642)
  • APPN configuration command (1547)
  • IPv6 configuration command (1980)
  • NDP configuration command (2054)
  • OSI configuration command (1870)
  • PIM configuration command (2083)
  • RIP6 configuration command (2145)
  • VINES configuration command (1680)
  • Enterprise Extender Support for HPR over IP (1476)
  • es-adjacencies
  • OSI/DECnet V monitoring command (1887)
  • ES-IS protocol (1788)
  • description (1851)
  • hello message (1852)
  • es-is-stats
  • OSI/DECnet V monitoring command (1889)
  • exclude lists (1938)
  • exit (1633)
  • console command (1634)
  • VINES monitoring command (1697)
  • Extended Border Node (1461), (1464)
  • configuring (1484)
  • CoS mapping table (1488)
  • network requirements (1462)
  • routing list (1486)
  • extensions
  • IBM vendor-private extensions. (1946)
  • path information extensions (1943)
  • F
  • features
  • IP version 6 (IPv6) (1964)
  • focal point (1468), (1492)
  • G
  • getting help (1631)
  • H
  • help
  • console command (1632)
  • HIDLU (1536)
  • HPR (1455), (1489)
  • I
  • IBM-specific extensions
  • NHRP (1945)
  • implementation on the router (1453)
  • implicit focal point (1475), (1564)
  • interface
  • AppleTalk Phase 2 monitoring command (1657)
  • IPv6 monitoring command (2012)
  • PIM monitoring command (2097)
  • intermediate session data, collecting (1503)
  • internal
  • IPv6 monitoring command (2014)
  • IP
  • packet size (2232)
  • IPv6
  • configuring (1967)
  • overview (1966)
  • using (1965)
  • ipv6 command (1969)
  • IPv6 configuration commands
  • add (1971)
  • change (1973)
  • delete (1975)
  • disable (1977)
  • enable (1979)
  • list (1981)
  • move (1983)
  • set (1985)
  • summary (1970)
  • update (1987)
  • IPv6 dynamic reconfiguration (2040)
  • IPv6 monitoring commands
  • access-control (2003)
  • accessing (1999)
  • cache (2005)
  • counters (2007)
  • dump (2009)
  • interface (2011)
  • internal (2013)
  • mcast (2015)
  • mld (2017)
  • packet-filter (2029)
  • path-mtu (2031)
  • ping6 (2033)
  • reset (2019)
  • route (2021)
  • sizes (2023)
  • sniffer (2025)
  • static (2027)
  • summary of (2001)
  • traceroute6 (2035)
  • tunnels (2037)
  • IPv6 update packet filter configuration commands
  • add (1989)
  • change (1991)
  • delete (1993)
  • list (1997)
  • move (1995)
  • is-adjacencies
  • OSI/DECnet V monitoring command (1891)
  • IS-IS messages
  • IS to IS hello (IIH) messages (1811)
  • point-to-point (1817)
  • IS-IS protocol
  • description (1805)
  • IS to IS Hello (IIH) messages
  • IS to IS hello (IIH) messages
  • L1 (1814)
  • L2 (1816)
  • IS-IS areas (1806)
  • IS-IS domain (1809)
  • overview (1789)
  • is-is-stats
  • OSI/DECnet V monitoring command (1893)
  • ISDN Permanent Circuit
  • APPN using (1513)
  • ISDN permanent connection (1514)
  • J
  • join
  • PIM monitoring command (2099)
  • L
  • l1-routes
  • OSI/DECnet V monitoring command (1895)
  • l1-Summary
  • OSI/DECnet V monitoring command (1899)
  • l1-Update
  • OSI/DECnet V monitoring command (1903)
  • l2-Routes
  • OSI/DECnet V monitoring command (1897)
  • l2-Summary
  • OSI/DECnet V monitoring command (1901)
  • l2-Update
  • OSI/DECnet V monitoring command (1905)
  • lane shortcut interface (LSI)
  • NHRP (1935)
  • leave
  • PIM monitoring command (2101)
  • link level parameter lists (1510)
  • list
  • AppleTalk Phase 2 configuration command (1644)
  • APPN configuration command (1572)
  • APPN monitoring command (1591)
  • IPv6 configuration command (1982)
  • IPv6 update packet filter configuration command (1998)
  • NDP configuration command (2056)
  • NDP monitoring command (2068)
  • OSI configuration command (1872)
  • PIM configuration command (2085)
  • RIP6 configuration command (2147)
  • RIP6 monitoring command (2157)
  • TN3270E monitoring command (1616)
  • VINES configuration command (1683)
  • Local Area Terminal (LAT) protocol (1704)
  • log
  • APPN monitoring command (1593)
  • LSI (1936) See also lane shortcut interface (LSI)
  • LU parameter list (1511)
  • M
  • managing network nodes (1466)
  • managing the router network node (1465)
  • mcache
  • PIM monitoring command (2103)
  • mcast
  • IPv6 monitoring command (2016)
  • memory
  • APPN monitoring command (1595)
  • message units, supported, APPN-related alerts
  • MFC dynamic reconfiguration (2128)
  • MFC for IPv6 dynamic reconfiguration (2131)
  • mgroups
  • PIM monitoring command (2105)
  • mld
  • IPv6 monitoring command (2018)
  • monitoring
  • APPN (1578)
  • IPv6 monitoring commands (2002)
  • NDP monitoring commands (2062)
  • PIM monitoring commands (2091)
  • RIP6 monitoring commands (2153)
  • move
  • IPv6 configuration command (1984)
  • IPv6 update packet filter configuration command (1996)
  • mstats
  • PIM monitoring command (2107)
  • Multicast Forwarding Cache- -see MFC (2129)
  • N
  • NCP
  • description of (1723)
  • NCP configuration commands
  • purge (1751)
  • set (1757)
  • show (1759)
  • show circuit (1765)
  • summary of (1733)
  • zero (1775)
  • NCP monitoring commands
  • purge (1750)
  • set (1756)
  • show (1758)
  • show circuit (1764)
  • summary of (1734)
  • zero (1774)
  • NDP
  • configuring (2041)
  • NDP command (2043)
  • NDP configuration commands
  • add (2045)
  • change (2047)
  • delete (2049)
  • disable (2051)
  • enable (2053)
  • list (2055)
  • set (2057)
  • summary (2044)
  • NDP monitoring commands
  • accessing (2059)
  • dhcpv6-relay (2063)
  • dump (2065)
  • list (2067)
  • ping6 (2069)
  • summary of (2061)
  • NDP6 dynamic reconfiguration (2072)
  • neighbor
  • PIM monitoring command (2109)
  • neighbor discovery protocol for IPv6--see NDP6 (2073)
  • Network Control Protocols (NCP)
  • for PPP interfaces
  • AppleTalk Control Protocol (1626)
  • Next Hop Resolution Protocol See also NHRP
  • overview (1921)
  • next-hop routers (1940)
  • NHRP (1918)
  • benefits (1922)
  • destination devices (1941)
  • examples
  • classic IP environment (1924)
  • classic IP environment with non-NHRP device (1925)
  • Egress Router (1929)
  • LAN emulation (1926)
  • LAN switches (1927)
  • mixed classical IP and ELAN (1928)
  • exclude lists (1937)
  • implementation (1930)
  • disallowed router-to-router shortcuts (1947)
  • IBM-specific extensions (1944)
  • LANE shortcuts (1934)
  • limitations (1923)
  • next-hop routers (1939)
  • virtual network interface (VNI) (1931)
  • NHRP configuration commands (1920)
  • accessing (1949)
  • add (1955)
  • advanced (1953)
  • change (1957)
  • delete (1956)
  • disable (1952)
  • enable (1951)
  • list (1954), (1958)
  • set (1959)
  • summary (1950)
  • NHRP interfaces
  • configuring (1919)
  • monitoring (1948)
  • NHRP monitoring commands
  • accessing (1960)
  • list of (1961)
  • NHRP server dynamic reconfiguration (1963)
  • node level parameter lists (1512)
  • node tuning (1498)
  • node types (1452)
  • O
  • Open System Interconnection (OSI)
  • address prefix encoding (1840), (1841), (1843), (1845), (1847)
  • attached L2 IS routers (1832)
  • authentication passwords (1849)
  • designated IS (1820)
  • domain specific part (DSP) (1796)
  • end system (ES) (1784)
  • end system hello messages (1853)
  • ES-IS protocol (1850)
  • external routing (1839)
  • initial domain part (IDP) (1794)
  • description (1795), (1797)
  • intermediate system (IS) (1786)
  • internal routing (1838)
  • IS hello messages (1854)
  • IS to IS hello (IIH) messages (1812), (1818)
  • IS-IS addressing format (1798)
  • address format (1803)
  • AFI (1844)
  • area address (1800)
  • default address prefixes (1848)
  • fixed length IDI (1842)
  • non-pseudonode (1825), (1829)
  • point-to-point (1819)
  • pseudonode (1827), (1831)
  • selector (1802)
  • system ID (1801)
  • variable length IDI (1846)
  • IS-IS areas (1807)
  • IS-IS domain (1808)
  • L1 IIH message (1813)
  • L1 link state updates (1824), (1826)
  • L1 routing (1835)
  • L2 IIH messages (1815)
  • L2 link state updates (1828), (1830)
  • L2 routing (1836)
  • link state databases (1822)
  • link state updates (1823)
  • multicast addresses (1804)
  • network address structure (1793)
  • network addresses (1792)
  • Network Entity Title (NET) (1799)
  • network protocol data units (NPDU) (1785)
  • NSAP addressing (1791)
  • protocols running under (1787)
  • pseudonode (1821)
  • routing metric (1837)
  • routing tables (1834)
  • synonymous areas (1810)
  • unattached L2 IS routers (1833)
  • optional features (1454)
  • OSI
  • configuring (1855)
  • X.25 over OSI (1860)
  • OSI configuration commands
  • add (1858)
  • change prefix address (1861)
  • clear (1863)
  • delete (1865)
  • disable (1867)
  • enable (1869)
  • list (1871)
  • set (1873)
  • summary of (1857)
  • OSI/DECnet V
  • monitoring (1856)
  • OSI/DECnet V monitoring commands
  • addresses (1876)
  • change metric (1878)
  • clnp-stats (1880)
  • designated-router (1882)
  • DNAV-info (1884)
  • es-adjacencies (1886)
  • es-is-stats (1888)
  • is-adjacencies (1890)
  • is-is-stats (1892)
  • l1-routes (1894)
  • l1-summary (1898)
  • l1-update (1902)
  • l2-routes (1896)
  • l2-summary (1900)
  • l2-update (1904)
  • OSI/DECnet V monitoring command (1883)
  • ping-1139 (1906)
  • route (1908)
  • send (echo packet) (1910)
  • subnets (1912)
  • summary of (1875)
  • toggle (alias/no alias) (1914)
  • traceroute (1916)
  • P
  • packet size (2230)
  • packet-filter
  • IPv6 monitoring command (2030)
  • path-mtu
  • IPv6 monitoring command (2032)
  • PIM
  • pim
  • configuring (2074)
  • PIM monitoring command (2111)
  • PIM command (2076)
  • PIM configuration commands
  • delete (2078)
  • disable (2080)
  • enable (2082)
  • list (2084)
  • set (2086)
  • summary (2077)
  • PIM dynamic reconfiguration (2123)
  • PIM for IPv6 dynamic reconfiguration (2126)
  • PIM monitoring commands
  • accessing (2088)
  • clear (2094)
  • dump (2092)
  • interface (2096)
  • join (2098)
  • leave (2100)
  • mcache (2102)
  • mgroups (2104)
  • mstats (2106)
  • neighbor (2108)
  • pim (2110)
  • ping (2114)
  • reset (2116)
  • summary of (2090)
  • summary pim (2112)
  • traceroute (2118)
  • variables (2120)
  • ping
  • PIM monitoring command (2115)
  • ping-1139
  • OSI/DECnet V monitoring command (1907)
  • ping6
  • BGP6 monitoring command (2220)
  • IPv6 monitoring command (2034)
  • NDP monitoring command (2070)
  • RIP6 monitoring command (2159)
  • Point-to-Point Protocol (PPP)
  • AppleTalk Control Protocol (1625)
  • policy-list
  • BGP6 monitoring command (2222)
  • port level parameter lists (1509)
  • port types supported (1477)
  • Protocol Independent Multicast Routing Protocol--see PIM (2124)
  • protocols
  • Digital Network Architecture (DNA) Phase IV (1698)
  • R
  • reset
  • IPv6 monitoring command (2020)
  • PIM monitoring command (2117)
  • RIP6 monitoring command (2161)
  • restart
  • APPN monitoring command (1603)
  • restrictions (1506)
  • RIP6
  • configuring (2132)
  • RIP6 command (2134)
  • RIP6 configuration commands
  • add (2136)
  • change (2138)
  • delete (2140)
  • disable (2142)
  • enable (2144)
  • list (2146)
  • set (2148)
  • summary (2135)
  • RIP6 dynamic reconfiguration (2165)
  • RIP6 monitoring commands
  • accessing (2150)
  • dump (2154)
  • list (2156)
  • ping6 (2158)
  • reset (2160)
  • summary of (2152)
  • traceroute6 (2162)
  • route
  • IPv6 monitoring command (2022)
  • OSI/DECnet V monitoring command (1909)
  • routing information protocol for IPv6--see RIP6 (2166)
  • routing list (1485)
  • routing tables
  • BGP6 dump command (2212)
  • rtp status
  • APPN monitoring command (1597)
  • rtp switchpath
  • APPN monitoring command (1599)
  • rtp test
  • APPN monitoring command (1601)
  • RU size (1499), (1551)
  • S
  • SDLC (1523)
  • APPN using (1522)
  • Seed router
  • AppleTalk Phase 2 (1623), (1629)
  • send (Echo Packet)
  • OSI/DECnet V monitoring command (1911)
  • set
  • AppleTalk Phase 2 configuration command (1646)
  • APPN configuration command (1550)
  • IPv6 configuration command (1986)
  • NDP configuration command (2058)
  • OSI configuration command (1874)
  • PIM configuration command (2087)
  • RIP6 configuration command (2149)
  • VINES configuration command (1685)
  • sizes
  • IPv6 monitoring command (2024)
  • sniffer
  • IPv6 monitoring command (2026)
  • SNMP managed node, using the router as (1472)
  • sphere of control (1469)
  • static
  • IPv6 monitoring command (2028)
  • stop
  • APPN monitoring command (1605)
  • subnets
  • OSI/DECnet V monitoring command (1913)
  • summary of
  • NCP configuration commands (1735)
  • NCP monitoring commands (1736)
  • summary pim
  • PIM monitoring command (2113)
  • supported message units (1470)
  • supported message units, APPN-related alerts (1471)
  • T
  • talk
  • OPCON command (1580), (1968), (2000), (2042), (2060) , (2075), (2089), (2133), (2151)
  • TG characteristics (1496)
  • the router as entry point (1467)
  • TN3270 (1524)
  • tn3270E server configuration (1527)
  • what is (1525)
  • tn3270e
  • APPN monitoring command (1607), (1611)
  • TN3270E monitoring commands
  • deactivate LU (1613)
  • list (1615)
  • TN3270E Server (1481)
  • TN3270E server (1526)
  • client IP Address to LU/Pool Mapping (1538)
  • client to LU mapping (1537)
  • configuration commands (1575)
  • Configuration parameters (1576)
  • Configuring, using DLUR (1543)
  • Configuring, using local node identifier (1544)
  • example configurations (1542)
  • load balancing among multiple PUs (1541)
  • monitoring commands (1612)
  • port and IP address mapping (1540)
  • Server TCP port to pool mapping (1539)
  • tn3270E server configuration (1528)
  • toggle (Alias/No Alias)
  • OSI/DECnet V monitoring command (1915)
  • Token-Ring 4/16
  • packet size (2231)
  • topology Database Garbage Collection (1473)
  • traceroute
  • OSI/DECnet V monitoring command (1917)
  • PIM monitoring command (2119)
  • traceroute6
  • BGP6 monitoring command (2226)
  • IPv6 monitoring command (2036)
  • RIP6 monitoring command (2163)
  • traces (1500)
  • tracing (1501)
  • transmission group characteristics, setting (1495)
  • transmit
  • APPN monitoring command (1609)
  • transporting data (1507)
  • tunnels
  • IPv6 monitoring command (2038)
  • U
  • update
  • IPv6 configuration command (1988)
  • using the router as SNMP managed node
  • V
  • V.25 bis (1520)
  • APPN using (1519)
  • variables
  • PIM monitoring command (2121)
  • VINES (1684)
  • Address Resolution Protocol (ARP) (1671)
  • basic configuration procedures (1672)
  • client nodes (1661)
  • configuring (1658)
  • disabling an interface (1678)
  • disabling globally (1679)
  • enabling an interface (1681)
  • enabling globally (1682)
  • monitoring (1673)
  • monitoring commands (1689)
  • neighbor tables (1666)
  • dumping (1694)
  • setting size (1688)
  • network layer protocols (1662)
  • Address Resolution Protocol (ARP) (1669)
  • Internet Control Protocol (ICP) (1668)
  • Routing Update Protocol (RTP) (1664)
  • VINES IP (1663)
  • overview (1659)
  • routing tables (1665)
  • dumping (1695)
  • setting size (1687)
  • RTP implementation (1667)
  • service nodes (1660)
  • setting number of client nodes (1686)
  • VINES configuration commands (1674)
  • VINES monitoring commands
  • counters (1690)
  • dump (1692)
  • exit (1696)
  • virtual network interface (VNI)
  • NHRP (1932)
  • VNI (1933) See also virtual network interface (VNI)
  • VTAM DSPU (1458)
  • W
  • WAN reroute (1517)
  • WAN restoral (1518)

  • [ Top of Page | Previous Page | Table of Contents | Index ]